• Heavy Duty Axle Rear Left/Right Each 14-15 Kawasaki KRT800 Teryx
1 1

Heavy Duty Axle Rear Left/Right Each 14-15 Kawasaki KRT800 Teryx

Heavy Duty Axle Rear Left/Right Each 14-15 Kawasaki KRT800 Teryx

$254.62 USD
$231.75 USD $254.62 USD
Sale Sold out
Shipping calculated at checkout.
Vehicle fitment & requirements
Manufacturer-verified fitment
  • : 2013–2015
    Exact model, year, trim, position/configuration and equipment combinations are listed in fitment_notes. All restrictions on each line apply.

    Manufacturer SKU PAXL-5012HD. Verified 2026-10-11 against embedded manufacturer SKU application data. Each line is an independent exact application; years must not be combined across models/trims/location-configuration keys/equipment. Only explicitly listed years are supported.
    2013 | KRF750 Teryx FI 4x4 LE Camo | Rear Left | PAXL-5012HD | S1
    2013 | KRF750 Teryx FI 4x4 LE Camo | Rear Right | PAXL-5012HD | S1
    2015 | KRF800 Teryx | Rear Left | PAXL-5012HD | S2
    2015 | KRF800 Teryx | Rear Right | PAXL-5012HD | S2
    2015 | KRF800 Teryx Camo | Rear Left | PAXL-5012HD | S2
    2015 | KRF800 Teryx Camo | Rear Right | PAXL-5012HD | S2
    2015 | KRF800 Teryx LE | Rear Left | PAXL-5012HD | S2
    2015 | KRF800 Teryx LE | Rear Right | PAXL-5012HD | S2
    2014 | KRT800 Teryx | Rear Left | PAXL-5012HD | S2
    2014 | KRT800 Teryx | Rear Right | PAXL-5012HD | S2
    2014 | KRT800 Teryx Camo | Rear Left | PAXL-5012HD | S2
    2014 | KRT800 Teryx Camo | Rear Right | PAXL-5012HD | S2
    2014 | KRT800 Teryx LE | Rear Left | PAXL-5012HD | S2
    2014 | KRT800 Teryx LE | Rear Right | PAXL-5012HD | S2
    Sources:
    S1: https://www.demonpowersports.com/products/kawasaki-teryx-750-demon-heavy-duty-axle
    S2: https://www.demonpowersports.com/products/kawasaki-teryx-800-demon-heavy-duty-axle

  • : 2012–2015
    Exact model, year, trim, position/configuration and equipment combinations are listed in fitment_notes. All restrictions on each line apply.

    Manufacturer SKU PAXL-5012HD. Verified 2026-10-11 against embedded manufacturer SKU application data. Each line is an independent exact application; years must not be combined across models/trims/location-configuration keys/equipment. Only explicitly listed years are supported.
    2012,2013 | KRT750 Teryx4 4x4 EPS LE | Rear Left | PAXL-5012HD | S1
    2012,2013 | KRT750 Teryx4 4x4 EPS LE | Rear Right | PAXL-5012HD | S1
    2014,2015 | KRT800 Teryx4 | Rear Left | PAXL-5012HD | S2
    2014,2015 | KRT800 Teryx4 | Rear Right | PAXL-5012HD | S2
    2014,2015 | KRT800 Teryx4 Camo | Rear Left | PAXL-5012HD | S2
    2014,2015 | KRT800 Teryx4 Camo | Rear Right | PAXL-5012HD | S2
    2014,2015 | KRT800 Teryx4 LE | Rear Left | PAXL-5012HD | S2
    2014,2015 | KRT800 Teryx4 LE | Rear Right | PAXL-5012HD | S2
    Sources:
    S1: https://www.demonpowersports.com/products/kawasaki-teryx4-750-demon-heavy-duty-axle
    S2: https://www.demonpowersports.com/products/kawasaki-teryx4-800-demon-heavy-duty-axle

Check your exact model, year, trim and equipment before ordering.

Select your vehicle to check the recorded application and installation requirements.

SELECT OR CHANGE VEHICLE →

Through years of research and development Demon Powersports has developed an axle that doesn't burn a hole in your pocket and adheres to the highest quality standards. These axles are bigger, beefier, and stronger.

Demon Heavy Duty Axles are built using larger CV joints and shafts, paired with our proprietary dual heat treatment process, and 4340 Chromoly Steel inner CV cage gives these the axles the edge it needs for superior strength and longevity.

These axles also utilize a unique double plunge design which allows it to achieve higher articulation angles approximately, the axles are designed to slide on the bar splines allowing for 1.5 inches of travel and 40 Degree articulation over terrain on the inboard joint.

The outboard joint can travel 0.5 inches and swing from 45 Degree-47 Degree depending on the model.

The Demon heavy duty axles are equipped The TPEE (Thermoplastic polyester elastomer) boots which are stronger, stiffer, more fatigue resistant, puncture resistant, and more temperature resistant than a standard OEM boot. Axles use molybdenum grease to provide low friction and smooth motion.

Trust in Demon Heavy Duty Axles to keep you riding!!

  • 15 Percent-20 Percent increase in diameter compared to regular axle
  • Inner cage Made up of 4340 Chromoly steel
  • Dual heat treated high strength chromoly steel shaft
  • Thermoplastic polyester elastomer (TPEE) Boot
  • 10 Percent-15 Percent increase in CV joint size compared to regular joints
  • Wider articulation angles
  • Dual plunge design prevents axle from binding
  • Packed with high load molybdenum grease Precision CNC machined
  • Can Fit 1.5 Inch- 5 Inch Bracket lift of particular brands/ All Portal Gear Lifts / 1.5 Inch- 5 Inch A-arms of particular brands
  • 1-year Limited warranty
View full details